product top

1a1a23a4a

 

Z-Wave Controller

p1
Home Center 2 is the fast, efficient and high power hub, that is used to control the FIBARO system. The Home Center 2 communicates with up to 230 actors and sensors using a wireless communication protocol named Z-Wave. The work of the FIBARO control unit is protected by an advanced data backup and recovery system - automatically stored on a USB stick hidden in the enclosure. Using the user-friendly configuration interface of the Home Center 2, you can create advanced, pre-defined scenes. The Home Center 2 can manage user rights and supports VoIP funcionality and video-intercoms. The Home Center 2 gives users the ability to write scripts in lua, which expands the functionality of the system.

 

 

 

 

 

 

 


 

p2B
The Home Center Lite is a new, incredibly compact brain of the FIBARO System, that uses proven solutions applied in the Home Center 2. The HCL is equipped with a new recovery system and has the ability to store backups in the cloud. It is smaller than HC2 and offers the possibility of further expansion with modules (battery and a GSM module*). The Home Center Lite controller allows for even greater integration of home multimedia systems with The FIBARO System.

 

 

 

 

 

 

 

Lighting

p4
A radio controlled light dimming module, designed to work with light sources of any type. It can be connected to two-wire or three-wire electrical system, and can switch or dim connected light source either through radio waves or through the wall switch connected directly to it. It can automatically sense connected devices, features automatic overload protection switch-off and soft start function. Works as a dimmer or as a connector.

 

 

 

 

 

 


 

p6
The radio controlled FIBARO On/Off Relay Switch is designed to be installed in standard wall switch boxes, or anywhere else where it is necessary to operate an electric device of 3000W of power output. The FIBARO On/Off Relay Switch can switch on or off connected device either through radio waves or through the wall switch connected directly to it.

 

 

 

 

 

 


 

p5
The radio controlled FIBARO Double On/Off Relay Switch is designed to be installed in standard wall switch boxes, or anywhere else where it is necessary to operate two independent devices of 1500W combined power output. FIBARO Double On/Off Relay Switch can switch on or off connected devices either through radio waves or through the wall switch connected directly to it.

 

 

 

 

 

 


 

p7
The RGBW Controller is a universal, Z-Wave compatible RGB/RGBW controller. The RGBW Controller uses a PWM output signal, which enables it to control LED, RGB, RGBW strips, halogen lights and fans. Controlled devices may be powered by 12 or 24 VDC. In addition the device supports up to four 0V-10V analog sensors, such as temperature sensors, humidity sensors, wind sensors, air quality sensors, light sensors etc. All IN and OUT terminals may be user configured for LED control or 0V-10V signal readouts.

 

 

 

 

 

 

Sensors

p8
The Universal Binary Sensor is a wireless module that makes it possible to improve the functionality of any sensor with a binary output by allowing it to communicate with the wireless Z-Wave network and the FIBARO system. Moreover, the module allows for wireless communication between the system and the two binary sensors or four DS18B20 temperature sensors. The Sensor’s main function is the integration of the wireless FIBARO system with the existing wire-based and wireless alarm and measurement systems. As an element of the safety system, the device is transparent for parametric alarm lines.

 

 

 

 

 

 


 

p9
The Smoke Sensor is an ultra light, perfectly designed battery or 12/24 VDC powered device that uses both photoelectric and temperature sensors for maximum protection from flaming and smoldering fires. The device is equipped with two types of alarms, a 100dbm build-in siren and an RGB visual indicator. The sensor has a built in Z-Wave rage tester and can be applied in both wireless Z-Wave network and any regular wired monitoring and alarm system. The unique feature of the FIBARO Smoke Sensor is a built-in electronic recording device, for the purpose of assisting the investigation of a fire incident or accident.

 

 

 

 

 

 


 

p10
The FIBARO Motion Sensor is a highly advanced, ultra small, multi-sensor. This tiny sensor has a built-in temperature and motion sensor, light sensor, and accelerometer. The eye of the sensor visually alerts you with changes in colour for any alert you assign for it, depending on your colour specification. The Motion Sensor is completely wireless and mobile, with a built-in network range tester, and remote firmware update. With the FIBARO Home Center 2 it will learn your patterns, adjust lighting according to each individual user liking, and even turn lights on in a room BEFORE you enter that room…. Now that is intelligent!

 

 

 

 

 

 

Accessories

p3
A radio controlled module, designed to work with roller blinds, awnings, venetian blinds, gates and other, single phase AC powered motors. Allows for precise positioning of a roller blind or venetian blind lamellas. Precise positioning is available for the motors equipped with mechanic and electronic limit switches and the device is equipped with the ability to monitor power consumption.

 

 

 

 

 

 


p111
The Dimmer Bypass enables the Dimmer module to control lamps which have a power of less than 25W. It is ideal for use with low-power LED lamps. The Fibaro Dimmer and Dimmer Bypass can only be used with lamps which are 'dimmable'. It is easy to install and fits into the wall socket alongside the Dimmer module of inside the light fitting.

 

 

 

 

 

 

Where To Buy

Kuala Lumpur

Chleo Chee
Digital Smart Home Services Sdn Bhd
73B, Jalan SS22/23, Damansara Jaya,
47400 Petaling Jaya, Selangor Darul Ehsan.

Fax : 03-7732 8864
HP : 010-2200034

 

 

 

 

 

Kuala Lumpur

Zacc Tang
Titanium Worldwide Sdn Bhd
103, Jalan Maarof, Bangsar,
59100 Kuala Lumpur.

Tel : +603-2201 3201
HP : +6012-2222 231
email : This email address is being protected from spambots. You need JavaScript enabled to view it.

Penang

Kelvin Foo
GDI Technology Sdn Bhd
12, Lorong Midlands,
10250 Penang,
Malaysia.

Tel/Fax: +604 229 6992
Website : http://www.gditec.com
Mobile: +6012 720 6118

Perak

Digital Security & Automation Sdn Bhd
68, Jalan Lau Pak Khuan,
Taman Ipoh, 31400 Ipoh, Perak.

Tel : 05-548 3036 / 548 2036

Perak

WINCOMM Trade & Services
8 & 10, Lebuh Shatin 8,
Taman Shatin, 31650 Ipoh, Perak

Tel : 05-322 7777
www.wincomm.net
This email address is being protected from spambots. You need JavaScript enabled to view it.

East Malaysia - Sabah Office

SMP Engineering Sdn Bhd
Lot S13-1 Ground Floor
Villa Tropicana Showroom Office
Jalan Pintaas, Kobusak Penampang
88300 Kota Kinabalu, Sabah

Tel : 013-8514816
This email address is being protected from spambots. You need JavaScript enabled to view it.

East Malaysia - Sarawak Office

Smartech Engineering Sdn Bhd
Lot 8953, Ground Floor,
Jalan Sekama, 93300 Kuching, Sarawak

Tel : 013-8514816
This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Sales Gallery

Artemis Lighting Gallery
103, Jalan Maarof, Bangsar
59100 Kuala Lumpur

Tel : +603-2201 3201
HP : +6012-2222 231